Home  /  Services  /  Painting

CHAPTER 08 — INTERIOR & EXTERIOR PAINTING

Paint shows
what's underneath it.

I do interior and exterior painting as part of home renovations and general maintenance in Bentleigh and the surrounding Melbourne suburbs. Paint is a thin finish, so cracks, patches and uneven joins underneath tend to show through. Before we talk about colours or products, I look at the surfaces you want painted and what condition they’re in.

ON THIS PAGE

01 — Inside and outside

02 — Preparing the surface

03 — Existing conditions

04 — Related finishing work

The on-site assessment and the detailed written quotation are both free.

01 — INSIDE

Interior painting

Walls, ceilings and other painted surfaces, often once tiling, plastering or other renovation work in the room is finished. Inside, the main questions are what the surface was painted with before, whether there are cracks, stains or patched areas to deal with, and how the room is used. A bathroom or laundry needs something different from a hallway or bedroom.

01 — OUTSIDE

Exterior painting

Outside, surfaces have to cope with sun, rain and changes in temperature, and the existing coating is often weathered, flaking or chalky. Exterior work also depends on the weather, so I plan the timing around suitable conditions rather than a fixed date. I’ll tell you what I can see, what needs attention first and if anything falls outside my scope.

A worker holds a broad metal joint knife loaded with white filler or plaster while using a smaller trowel on an interior surface.

Reference photo: filling a wall surface before it is finished.

02 — PREPARING THE SURFACE

Most of the work happens
before the first coat.

In my experience, proper preparation matters as much as the visible finish. An expensive paint can’t make up for a surface that’s dirty, loose or badly repaired. Read from the top down, the layers look like this:

FINISH COATS
Chosen to suit the room and the surface, not just the colour.

PRIMING
Used where bare, patched or previously different surfaces need it.

FILLING & SANDING
Cracks, holes and dents are repaired, then smoothed so they don’t show through.

CLEANING & LOOSE MATERIAL
Dust, grease and flaking paint come off, so the new coats have something sound to hold on to.

There’s more on this approach on the Surface Preparation page. Where walls need more than a patch, see Plasterboard Installation & Plastering.

03

03 — EXISTING CONDITIONS

What's under the old paint

Some conditions only show up once the existing finishes are removed. Old paint can lift during preparation, a patch can hide a bigger crack, or a wall can have damage that couldn’t be seen from the surface. If that happens, I’ll explain what I’ve found and go through the practical options with you before going any further.

Costs, timeframes and work requirements depend on the existing property, the materials you choose and the agreed scope. Any pricing I mention before a detailed written quotation is general guidance only.