A gloved worker is spreading mortar with a notched trowel while installing large floor tiles, using blue tile spacers and levelling clips.
Home  /  Services  /  Wall & Floor Tiling

02 — WALL & FLOOR TILING

Wall & floor tiling, planned from the surface up.

I install wall and floor tiles throughout the home and replace damaged or ageing tiles in Bentleigh and the surrounding Melbourne suburbs. Before I recommend a tile or an adhesive, I look at the surface it will go onto, because that surface decides how long the finish lasts.

The on-site assessment and the detailed written quotation are both free.

WHY PREPARATION COMES FIRST

A better tile can't fix a poor surface

In my experience, proper preparation matters as much as the visible finish. A more expensive product cannot make up for a surface that is unsuitable or poorly prepared.

That’s why every tiling job starts with an on-site assessment. I look at the existing conditions: the wall or floor as it is now, what is already on it and how the room is used. Then I suggest materials and an approach that suit what I’ve found.

You deal directly with me from that first visit through to completion. The person who assesses your surface is the same person who prepares and tiles it.

You can read more on Surface Preparation or in the guide Why Preparation Matters as Much as the Finish.

01 — SET-OUT: WALLS VERSUS FLOORS

01

Walls and floors are set out differently

On a wall, I plan the rows from a level line so the cuts land evenly at the ceiling, at corners and around fittings, and so the joints line up with windows, benchtops or niches. On a floor, I set out from the doorway and the main sightlines, and plan where the tiles meet other floor coverings, so the cut tiles end up where you won’t notice them.

02 — PREPARING A WALL OR A FLOOR

02

Different surfaces, different preparation

Walls are often plasterboard, render or old tiles, so I check they’re firm, straight and suited to the tile you’ve chosen. Floors take foot traffic and furniture, so I look for movement, hollow spots and dips that a larger tile would show. The full layer-by-layer explanation is on the Surface Preparation page.

03 — REPLACE TILES OR RETILE

03

Replacing a few tiles or retiling the room

If only a handful of tiles are cracked or loose and the surface behind them is sound, replacing just those tiles can be the practical option, although an exact match for older tiles isn’t always available. If tiles are failing across the room, or the surface underneath has moved, retiling usually makes more sense. I’ll show you what I’ve found before you decide.

04 — EXISTING CONDITIONS

04

What the old tiles leave behind

Tiling over existing tiles, around old fittings or onto earlier patch repairs all raise their own questions, and so do moisture and movement. Some concealed conditions only become apparent once the existing finishes are removed. If that happens, I’ll explain what I’ve found and talk through the options before going any further. You can read more in What Can Be Hidden Behind Old Tiles.

Costs, timeframes and the work required depend on the existing property, the materials you choose and the agreed scope. Any pricing is general guidance only until it’s set out in a detailed written quotation.

WHERE I TILE

Walls and floors
throughout the home

Ch. 01

Bathrooms

Bathroom wall and floor tiling, either on its own or as part of a renovation. Appropriately licensed specialists complete the plumbing and electrical work. Bathroom Tiling & Renovations →

Ch. 03

Kitchens

Splashbacks and kitchen floor tiling, planned around your cabinetry and benchtops. Kitchen Splashbacks & Floor Tiling →

Ch. 04

Laundries

Laundry wall and floor tiling for a room that has to cope with water and constant use. Laundry Tiling & Renovations →

Ch. 06

Other floors and walls

Tile installation in other parts of the home, as well as broader floor work. Flooring Improvements →
White wall tiles are being installed in rows on a partially unfinished wall, with a tape measure stretched across the surface for layout guidance.

Wall tiles going up in rows, with a tape measure marking out the layout.

REPLACEMENT & REPAIRS

Damaged or ageing tiles

Cracked, loose or worn tiles usually point to something underneath. When I replace them, I look at why they failed so the new tiles aren’t laid over the same problem. Sometimes a repair is the practical answer and sometimes retiling makes more sense. Either way, I’ll tell you what I think and why.

Before you get in touch

— Your suburb
— The wall or floor, and the work you have in mind
— Photos, if you have them

See How to Prepare for an On-site Assessment, then Discuss Your Project →