Home  /  Tiling Guides

TILING & RENOVATION GUIDES — WRITTEN BY IVAN BODNAR

Read down to
what's under the finish.

These are plain-English guides for homeowners in Bentleigh and the surrounding Melbourne suburbs who are planning tiling or renovation work. Each one covers something I look at on every job: the surface, the existing conditions, how to choose tiles that suit the room, and how to get ready for an on-site assessment.

A person's hand is pressing a plain white rectangular tile into adhesive on a wall above a timber surface.

A QUICK CHECK BEFORE YOU START READING

Five things to look at
in the room first.

01   Tap a few tiles with the handle of a screwdriver. If one sounds hollow, it may no longer be properly bonded.

02   Look for cracks that run across several tiles. These usually point to something underneath, not to one damaged tile.

03   Check the grout lines around the shower, bath and splashback for gaps, crumbling or staining.

04   Walk the floor slowly and note any lifting edges, soft spots or uneven areas.

05   Take photos in daylight: one wide shot of the room and a few close-ups of anything that concerns you.

This doesn’t replace an on-site assessment, but you’ll have a clearer picture before you get in touch. How to prepare for an on-site assessment →

THE GUIDES

Four guides, read from
the tile down.

Most people plan a renovation starting with what they’ll see. These guides start there too, then work down through preparation and existing conditions to the point where the work actually begins, which is the on-site assessment. In my experience, proper preparation matters as much as the visible finish.

01

LAYER 01 — THE VISIBLE TILE

Choosing Suitable Tiles for Bathrooms, Kitchens & Laundries

A tile that looks right in a showroom isn’t always right for a wet floor, a splashback behind a cooktop or a busy laundry. This guide explains how I think about surface, size and grip for each room, and why the room’s existing walls and floor affect what’s practical to lay.

02

LAYER 02 — SURFACE PREPARATION

Why Preparation Matters as Much as the Finish

A more expensive tile can’t make up for an unsuitable or poorly prepared surface. This guide covers what I check before any tile goes down, including whether the surface is flat, sound and clean, and why fixing it first is part of the job, not an extra.

03

LAYER 03 — EXISTING CONDITIONS

What Can Be Hidden Behind Old Tiles

Some conditions only become apparent once the existing finishes are removed. This guide explains what that can mean for a bathroom, kitchen or laundry, and how I talk you through anything unexpected before the work continues. Costs, timeframes and requirements depend on the existing property, the materials you choose and the agreed scope.

04

LAYER 04 — WHERE THE WORK STARTS

How to Prepare for an On-site Assessment

The on-site assessment and the detailed written quotation are both free. This guide covers what’s worth having ready, such as photos, your priorities for the room and any tiles you already have in mind. It also explains why any pricing discussed before a written quotation is general guidance only.

FROM THE GUIDES TO YOUR HOME

A guide can explain it.
Your room still needs a look.

Every home I work in is different, so these guides explain how I approach things rather than giving fixed answers. When you’re ready, tell me your suburb, the work you have in mind and send photos if you have them. You deal directly with me from the on-site assessment through to completion. Plumbing and electrical components are completed by appropriately licensed specialists.